E2 Image for AzBox HD Elite & Premium (Version alpha para TEST)

[MARMARİS Lİ]

AZbox Enigma 2 by The_ripper - TEST

Cuidadito, es una vesion para test y puede dar problemas
Kaynak: Sat Cafe uydu forumları Türkiye'nin En Güncel Uydu Forumu http://satcafesi.net/forum/azbox/3289-e2-image-for-azbox-hd-elite-and-premium-version-alpha-para-test.html

Installation is performed as with a normal FW, patch.rar Unzip the file and switch patch.bin file on a FAT 32 formatted USB memory stick, insert the Receiver, and select Update from USB.

Enigma 2 by The_ripper - TEST -
Hello guy's,

With big thanks to the The_ripper, we got the First version of Enigma 2 which we can test on our AzBox HD Receivers :

This version is only for Elite and Premium.

Premium+ version will be out also today.

Raskino we are shame on YOU !!! And all what You said against AzBox HD devices !!!


Transfer the patch.bin file to the FA**2 formated usb stick, and update Your receiver like with normal azbox fw.

All comments are welcome.

Keep in the mind, that this enigma is running without Tuner drivers, which still have to be finished !!!

Elite y Premium:
[Üye Olmadan Linkleri Göremezsiniz. Üye Olmak için TIKLAYIN...]

Premium Plus solamente:
[Üye Olmadan Linkleri Göremezsiniz. Üye Olmak için TIKLAYIN...]

[MARMARİS Lİ]

Para los que al flasear e2 en Azbox cuando se para la instalación en el 58% y ahora tienes el mensaje BOOTING en el display

Solucion elavorada por telesat en inglés:


You will need :

- Application Acronis True Image

- E2Backup.tib

- External HDD case with IDE controller ( or if You are working on PC, Motherboard which have IDE controller ) .

Take the DOM from AzBox and connect it with IDE connector from Your external usb case for HDD .

Connect the red wire from power cable ( 4-pin Molex connector ) from case ( +5V ) ( picture: Molex and pwrcom ) with right oriented pin on connector which is on DOM - pictures DOM1 and DOM2

Connect USB cable from the HDD case with Your PC.

Now, startup Acronis True Image application, and choose Recovery from the menu on right side - picture 1

Choose Disk Recovery on the top of the window and load file E2Backup.tib and press next - picture 2

Choose Recover whole disk and partition and press next - picture 3

Check-all whole Disk, so it means two partitions : Ex** and Linux Swap and press next - picture 4

Choose on which disk You will restore content, in our case DOM, and press next - picture 5

Commit with OK - picture 6

Choose Proceed - picture 7

Wait for few minutes that process complete - picture 8

When the restore of data and partitions finish, press Ok - picture 9

now You can exit from application, 'Safely' eject Your external USB HDD, in our case DOM.

Disconnect usb cable, and put back the DOM on AzBox, turn on AzBox and wait for 20 seconds that E2 boot.

Now you can take a look on enigma, and when You decide to go back on Official version of Firmware, that You can do with plugin from DDdamir.

Installation od DDamir plugin is described in another tutorial.
[Üye Olmadan Linkleri Göremezsiniz. Üye Olmak için TIKLAYIN...]