kahraman elektronik n11.com-kahraman elektronik
Toplam 1 adet sonuctan sayfa basi 1 ile 1 arasi kadar sonuc gösteriliyor

Konu: Azbox HD Files Latest Version of Multicas

  1. #1
    Kullanıcı
    Üyelik tarihi
    13 Mayıs 2011
    Mesajlar
    887
    Beğendikleri
    0
    Beğenileri
    5 Beğenilmiş

    Standart Azbox HD Files Latest Version of Multicas

    MultiCAS
    -DATE : 2011/05/18
    -Version : v1.70
    -----------------------------------------------
    ADD : Added BISS key (See include new_biss.key and below)
    - Al Jazeera Channel (Eutelsat W4/7 @ 36°E)


    ADD : Added Re-Sharing (CCcam via Local Share, see as below)




    --- How to use Re-Sharing of CCcam share ---


    Use one CCcam account for more Azboxes with MultiCAS




    1. Azbox connected to CCcam server


    a. Get CCcam account.
    b. Go to Plug-Ins->OpenXCAS->MultiCAS and smart Card Splitter & CS Menu
    c. Select Mode as Server and set the sub-menu as follows ;
    - My IP Address : this is the IP adres of your Azbox. This will be the server IP address in the client.
    - Port : 3000 (default value) - Please set the value between 1000 and 9000.
    - Time Out : 2.0 sec (default value). If you use more clients this time-out value must be higher. Please keep it below 4.0 seconds.


    - Save the changed values by pressing RED button on RCU.



    2. Client Azbox


    a. Go to Plug-Ins->OpenXCAS->MultiCAS and Smart Card Splitter & CS Menu
    b. and select Mode as Client and set the sub-menu as follows ;
    - Server Domain Name Use : OFF (or ON if you use DNS.)
    - Server IP Address : Set the IP address of the Server STB.
    - Server Domain Name : If the Server Domain Name Use is ON, put the domain name.
    (if you use local share between Azboxes in your house the Server IP Address will be like 192.168.xxx.xxx)
    - Port : 3000 (default value) - Please set the same value with that of Server STB.
    - Time Out : 1.0 sec (default value will 1.0 sec, but 3.0sec will be better)
    - Check Server : Press OK button for checking the Server STB. If the server information is correct, you will see Server CAS ID : 0x0000.


    - Save the changed values by pressing RED button on RCU.
    - Go to TV and check the channel is working well.
    - If you would have more sets to use Client please follow the above procedure again.
    - If the TV channel on Client STB is not working please try to adjust the value of Time Out.
    Eklenen Dosyalar Eklenen Dosyalar

  2. AVRUPA IPTV HIZMETLERI

Benzer Konular

  1. Latest Version of Multicas
    Konu Sahibi kargo.25 Forum Azbox
    Cevap: 0
    Son Mesaj : 18.Eylül.2011, 10:27
  2. Latest Version of DreamBoxEdit
    Konu Sahibi kargo.25 Forum Addons-Skin-Plugin-Tools Enigma2
    Cevap: 0
    Son Mesaj : 05.Haziran.2011, 23:46
  3. Cevap: 1
    Son Mesaj : 03.Haziran.2011, 15:00
  4. Latest Version of FileZilla
    Konu Sahibi kargo.25 Forum Addons-Skin-Plugin-Tools Enigma2
    Cevap: 1
    Son Mesaj : 24.Mayıs.2011, 13:37
  5. Latest MultiCAS
    Konu Sahibi polta Forum Azbox
    Cevap: 0
    Son Mesaj : 15.Mayıs.2011, 18:20

Bu Konu için Etiketler

Bookmarks

Yetkileriniz

  • Konu Acma Yetkiniz Yok
  • Cevap Yazma Yetkiniz Yok
  • Eklenti Yükleme Yetkiniz Yok
  • Mesajınızı Değiştirme Yetkiniz Yok
  •