gittigidiyor

Vu+ Duo_Güncel Backuplar

coolmeen

DREAMBOX TEKNİSYENİ
Administrator
Katılım
11 Haz 2012
Mesajlar
10,804
Tepkime puanı
645
Puanları
113
Konum
ULM Donau
OpenPLİ 4.0_Duo_Back-up_09.10.2014_Memorist

OpenPLİ 4.0_Duo_Back-up_09.10.2014_Memorist

E2 Kanal Setting 42E_46E_39_28.2_23.5_19.2E_16E_13E_9E_7E_4.8E_7W_3 0W--29_09_ 2014 Galaxy2002

Openpli imajla gelen şifre var telnetden bağlanmak isterseniz şifre ve kullanıcı adı sorar root yazıp passwd yazıp yeni şifre atayabilirsiniz.

Emu cam: oscamymod 18.52 Cccam 2.30 kuruludur gerekli etc altına cfg dosyanızı ve oscamserver dosyanızı ise /etc/tuxbox/config/oscam-stable/oscamserver,e editlersiniz ve emu güncellenmiştir.

Backup multibootdan alınmıştır ama Flash yada multibootda kullanabilirsiniz

Gerekli eklentiler yüklenip ayarlar yapılmıştır


2QJ96O.jpg


LobnDz.jpg


9pmdNO.jpg


b4BG6n.jpg


AY1kDQ.jpg


OdoLv3.jpg


DOWNLOAD
File-Upload.net - vuplus.zip
 

coolmeen

DREAMBOX TEKNİSYENİ
Administrator
Katılım
11 Haz 2012
Mesajlar
10,804
Tepkime puanı
645
Puanları
113
Konum
ULM Donau
BLackHole-2.1.1_Duo_Multiboot_Backup_02.10.2014_Memorist

BLackHole-2.1.1_Duo_Multiboot_Backup_02.10.2014_Memorist

Daha önceden ext3 ext4 olarak biçimlendirilmiş Multiboot olarak ve kullanıma hazır yüklenmiş olan usb stick,lerdeki backup yada imajlarınızı kullanabilirsiniz sadece 8 imaj + Flash olup Ver:4.0 imajlarıda kullanmanıza olanak sağlar.


Usb girişine usb stck inizi takıp Mavi X 2 Basıp devicesmanagerden mount edip sonrasında ana dizinde bulunan multiboot eklentisine girip usb yi yükle seçeneğini kullanıp aktif hale getirmeniz gerekir sıfırdan imaj yüklemek isteyenler ise buradan yardım olabilir Az buçuk mantık aynı Meboot (Multiboot)


Skins: Orjinal

2x BootLogo eklendi.

Gerekli Tüm ayarlar Yapılmıştır Caps resimlerden ön bilgi edinebilirsiniz

Emu Cam:

Btkcam 90
CCcam 2.3.0
CCcam 2.2.1
Mgcamd 1.38c
Oscamymod 18.52


Z1Yvpz.jpg


zEn8Lg.jpg


kYE4pv.jpg


Dk3zmy.jpg


gLXdpQ.jpg


nGEzoa.jpg


jYB0Rg.jpg


DOWNLOAD
File-Upload.net - vuplus.zip
 

mhatem2

Aktif Üye
Katılım
1 Eyl 2011
Mesajlar
92
Tepkime puanı
0
Puanları
6
Yaş
76
Konum
mersin
Cevap: Vu+ Duo_Backup

Ustam,bu backup ham dosya..sevgiler
 

coolmeen

DREAMBOX TEKNİSYENİ
Administrator
Katılım
11 Haz 2012
Mesajlar
10,804
Tepkime puanı
645
Puanları
113
Konum
ULM Donau
Cevap: Vu+ Duo_Backup

HDMU-VuDUO-Backup-30.10.2014-Memorist

E2setting-Galaxy2002 10 satellite.

Emu cams:Oscamymod / CcCam 2.3.0_Emu Güncel.

Menü+HDMU Center >>>Softcam kontrol > Start yeşil tuş.

Paylaşım satınızı Usr/k£ys altına editleyiniz

FTP şifresi HDMU

Tüm ayarlar ve Gerekli pliginler yüklenmiştir .

Resimlerden ön bilgi edinebilirsiniz.

İyi seyirler..


JEJqvY.jpg


5RlLOj.jpg


NbBlj5.jpg


VynPjr.jpg


lzG3AX.jpg


532035259.gif

File-Upload.net - vuplus.zip

Memorist ustaya backubu hazırladığı için Tesekkur ederiz.
Emegine Saglık ustad.
 

coolmeen

DREAMBOX TEKNİSYENİ
Administrator
Katılım
11 Haz 2012
Mesajlar
10,804
Tepkime puanı
645
Puanları
113
Konum
ULM Donau
Cevap: Vu+ Duo_Backup

Black Hole 2.1.2 image.

"This release is dedicated to our friends that are sadly no longer with us Paolino and BigEd"
What is new:


New skin MX Black Speed P
Duo2 drivers: fix dual DVB-T2/C tuner in changing mode
Update languages: es, no
Updated MediaTree (all dvb usb drivers)
Updated OpenWebIf
[hbbtv] Update and fix crash
[ScanSetup] Support TT3L10 automatic scan.
[TransCodingSetup] fix set config bug and wrong description.
[ScanSetup] dvb-t2 channel should be searched using scan app. & fix typo.
fix vuplus-blindscan-utils
Support dual DVB-T2/C Tuner automatic scan
Adjust bmem in duo/solo
- To support 1080 FB
update drivers
20141021
- Support 1080 Framebuffer(duo/solo need kernel update)
- Support Dual DVB-T2/C Tuner(uno, ultimo, duo2)
- Support 4 vtuners(solose, vtuner is mutually exclusive with transcoding)
Added rtl8812au driver to the image (DWA.182 Rev A1 dongle works GREAT!)
Added isofs module in images with kernel 3.9.x are always compiled as a module (M)
[rt3070] added support for DWA-140 rev D1 (experimental)
Fix WOL problem in duo2
update drivers
20140925(duo2, solo2, solose)
- Fix HDMI problem in some AV receivers
- Fix WOL problem(duo2)
- Fix AGC/SNR display(SSH108)
- Fix misc bugs.
[rtl8812au] changed drivers from Edimax to GitHub
[rtl8188eu] Updated driver to the last commit available
Update driver
20140829(solo2, solose)
- Fix transcoding problem(solo2, solose)
- Optimize memory usage(solo2)
[vuplus-webmanual] fix incorrect output for solose.
update drivers
20140808(duo2, solose, uno, ultimo)
- Improve DVB-C/T(CXD1978) tuning performance
fix uno/ultimo harddisk detection
fix slow network


v9rgfo1ewan.jpg


w62q9dcplgf.jpg


uu2g7d7wrdr8.jpg


zzsymdjtoyvb.jpg


WARNING: This Image has the latest drivers and CAN NOT be installed in multiboot. The image MUST be installed in flash.

Black Hole does not support images not installed in flash.

This latest version of the Black Hole series has been entirely rewritten and improved in the code for maximum stability and performance.

Please note that of all images Black Hole now has the best epg system:

- Integrated OpenEpg

- Rytec dedicated epg.dat

- New system epg.dat outside.

This last feature gives the possibility to various forums or communities to create their favorite EPG data files and load them into a web space.

Community members can then download it from our servers.

This feature provides other benefits such as:

Increase download speed of EPG

Download EPG from any channel

Schedule the download of EPG decoder even during standby

Users can customize the providers using Add / Remove function

Main functions of the buttons on the remote

OK button = Skin with simple information

OK button x 2 = Extra Info Skin

Blue button = Black Hole Blue Panel

Blue button and then Red button = Black Hole Epg Panel

Blue button and then Yellow button = System Monitor Panel

Blue button long press = Extensions

Yellow button = Audio menu

Green button = Black Hole Green Panel

Green button long press = Subservices

Green button and then Red button = Fast Plugin Setup

Green button x 2 = Fast Plugin

Button Red short press= access HbbTv functions

Button Red long press= Red Panel (Parallel Universes Teleportation)

Addons

Green button and then Yellow button takes you to:-

Dedicated server for BlackHole addons

Download and install additional packages from the Black Hole server

Infobar / OSD

Analog Clock Gui

Channel orbital location

Advanced Tuner Info: Sr Freq Pol Fec

Signal SNR, BER

Infobar picons

Characteristics of BlackHole Panels

Blue Panel

Extra Settings

Black Hole Speed Up

Black Hole Cron Manager (Manage schedules)

OSD Settings (OSD configuration)

Devices Manager

Usb Format Wizard

Kernel Modules Manager(Kernel module operator)

Inadyn Settings (Configure Inadyn)

Swap File Settings (Configure File Swap)

Hard Disk Settings (Configure Hard Drive)

OpenVPN Panel ( OpenVPN Panel)

Samba / CIFS Panel ( Samba Panel)

NFS Server Panel ( NFS server Panel)

Telnet Panel ( Telnet Panel)

FTP Panel ( FTP Panel)

UPnP Client Djmount

UPnP Server Mediatomb

UpnP Server Minidlna

Pcsc Panel

Tuner Server

Network Browse & Mountpoints

Info Panel

1 - Gui Setting (Gui configurations)

2 - Service Information (information system)

3 - About (info)

Memory (Memory)

Space (capacity)

CPU (processor)

Process (process)

EPG Panel

Global settings (global settings EPG)

Setting Provider (ISP settings)

Green Panel

Fast Plugin Setup (Configure quick access to your favourite plugin)

Fast Plugin (Access your favourite plugin)

Addons (added)

Addons Download Manager (Manager for package downloading)

Online Feeds Settings update

Online Black Hole image update

Manual Install BH packges (Manual installation of Black Hole packages)

Manual Install IPK packages (Manual installation of IPK packages)

Addons Uninstall Panel (Uninstalled packages)

Black Hole Statistics (See connections, top downloads and more)

Characteristics of BlackHole Panels

Red Panel

BH Parallel Universe Teleportation

BlackHole

Avalon

Chaos

Ghost

Credits

Thanks to Pedro_Newbie for Backup script

Thanks to the group of Beta Testers.

Thanks to Rytec for providing us with the server with all epg.dat files.

Thanks to MaxZ4 for Integrated EPG loader.

Thanks to Skaman for Cross EPG

Thanks to Lukkino (VDR-Italy) for the source code of OpenTV.

Thanks to Reinh@rd for the file satellites.xml.

Thanks to Littlesat and Pli Team for the original autolanguage and subtitle options code

DISCLAIMER

THE BLACK HOLE IMAGE IS BASED ON THE OFFICIAL FIRMWARE PUBLISHED BY VU+ AND IN ACCORDANCE WITH THE LAW IT CONTAINS ONLY SYSTEM ADDITIONS & GRAPHIC CHANGES.

THE BLACK HOLE IMAGE DOES NOT CONTAIN ANY EMULATOR, K E Y S, SOFTCAMS OR OTHER SYSTEM FOR VIEWING PAY - TV WITH OR WITHOUT A PAID SUBSCRIPTION.

LASTLY, THE BLACK HOLE IMAGE DOES NOT CONTAIN ANY SYSTEM TO DOWNLOAD PLUGINS OR EMULATORS FROM EXTERNAL SERVERS OR SOFTWARE THAT MAY BE USED FOR ILLEGAL PURPOSES SUCH AS CARD SHARING.

LICENSE (TERM OF USE)

THE BLACK HOLE IMAGE IS ISSUED FOR THE FREE USE FOR ALL USERS PROVIDED THAT IT WILL NOT BE CHANGED IN ANY WAY AND THAT IT WILL ONLY BE USED FOR LAWFUL PURPOSES.

ANY CHANGES OR ADDITIONS TO BLACK HOLE IMAGE THAT INVOLVE UNLAWFUL USE OF THE IMAGE SUCH AS CARD-SHARING AND EMULATORS ARE NOT ALLOWED AND CAUSE THE REVOKE OF THIS LICENSE.

This is free hobbyist software and it comes with absolutely no warranty. Use it at your own risk.


532035259.gif

File-Upload.net - BlackHole-2.1.2-bm750_usb.zip
 

cilginyurekli

Aktif Üye
Katılım
14 May 2011
Mesajlar
1,560
Tepkime puanı
57
Puanları
48
Yaş
43
Konum
germany
VTi-VuDuo-V 7.0.1-Backup-Memorist-05.11.2014

VTi-VuDuo-V 7.0.1-Backup-Memorist-05.11.2014


Backup Sıfır imajdan yapılmıştır

E2setting-Galaxy2002‎ 10 satellite.

HBBTV ve usb tuner kaldırıldı (Hafıza Yetersizliği nedeniyle).

Emu cams:Oscamymod-18.55/ CcCam 2.1.3_Btkcam_90 + Mgcamd v1.38-Scam 359-Emu Güncel.

Backubu Flash yada Multiboot,da kullanabilirsiniz.

Tüm ayarlar ve Gerekli pliginler yüklenmiştir.

Diseqc AYarlarını kendi sisteminize göre ayarlayınız..

Sevgiler İyi Seyirler...



http://s3.dosya.tc/server28/OjLgaH/vuplus.zip.html











 

cilginyurekli

Aktif Üye
Katılım
14 May 2011
Mesajlar
1,560
Tepkime puanı
57
Puanları
48
Yaş
43
Konum
germany
OpenLD-1.80_VuDUO²_Backup_23.11.2014_KaYaCaN*

OpenLD-1.80_VuDUO²_Backup_23.11.2014_KaYaCaN*


OpenLD-1.80_VuDUO²_Backup_23.11.2014_KaYaCaN*
.
Backup bu gün hazırlanmıştır.
.
Backup ta 23.Kasım.2014 tarihli,4 uydulu setting vardır.
.
DiSEqC SIRALAMASI
Türksat-42E
Hot Bird-13E
Eutelsat7-7E
Astra-19.2E

.
4 uydunun PiCON ları backupa yüklenmiştir.
.
SKİN: HD Glass16-v9.03 Yüklenerek tüm ayarları yapıldı.
.
EMU:Eklentilerden CamdMenager'e girerek, Cccam-2.2.1,cccam-230,MgCamd-1.38c,Oscam-ymod-t18-56,BtkCam-090 istediğinizi başlatabilirsiniz.
.
EKLENTiLER: Resimlere bakarak ön bilgi edinebilirsiniz.
.
BiSS le açılabilen kanallar açıktır.
.
OpenLD-1.80_VuDUO²_Backup_23.11.2014_KaYaCaN
http://www.turkeyforum.com/satforum...nLD-1.80_VuDUO²_Backup_23.11.2014_KaYaCaN.zip
.

jG3Ea1z.jpg

nGYGr8l.jpg

CGYwXwt.jpg

8lOd2qg.jpg

nIC8RnP.jpg

LFqHcXh.jpg

R7ENcBg.jpg

PbfC8hE.jpg

kSKolc2.jpg

tHYeAev.jpg

1TbBAzI.jpg

knDThIb.jpg

ggeq1rP.jpg

AQcFYg7.jpg

hcdkHg0.jpg

J48NoEY.jpg

X4Uu2SF.jpg

cK4zYYs.jpg
 

komagenne

Aktif Üye
Katılım
23 Kas 2014
Mesajlar
1
Tepkime puanı
0
Puanları
0
Konum
GOP
Cevap: OpenLD-1.80_VuDUO²_Backup_23.11.2014_KaYaCaN*

eklenti nasıl acılıyor anlamadım
 

coolmeen

DREAMBOX TEKNİSYENİ
Administrator
Katılım
11 Haz 2012
Mesajlar
10,804
Tepkime puanı
645
Puanları
113
Konum
ULM Donau
Cevap: Vu+ Duo_Backup

BLackHole-2.1.3-V2.VuDuo.Backup.Memorist.24.11.2014

E2setting-42E_46E_39_28.2_23.5_19.2E_16E_13E_9E_7E_4.8E_7W_3 0W- Galaxy2002 .

Tuner A Olarak gelişmişden anten kurulum ayarlarınızı yapılandırınız.

Skins Matrix Mod AdrenalinNRW dostumun emeği kullanılmıştır Kendisine çok Teşekkür ederim.

2x BootLogo ve Spinner değişti

Picon gösterimi için Usb stick,inizi Media/usb olarak 2XMavi tuştan devicesmanagerden mount ediniz .

Emu Cam:Btkcam 90--CCcam 2.3.0----Oscamymod 18.56-- Emu Güncel.

Paylaşım satırı Cfg Etc altı CCcam.cfg dosyası oscam için /etc/tuxbox/config/oscamserver dosyanızı editleyiniz

Bazen takılan aygıt,da RestartGui yapılarak boş ekran görebilirsiniz mount edebilmek için yeniden başlatmanız gerekebilir.

Hava durumu için menü+eklentilerden Weather Plugin,den şehir kodunuzu girerek gösterebilirsiniz

Gerekli Tüm ayarlar Yapılmıştır Caps resimlerden ön bilgi edinebilirsiniz


lzMaal.jpg


ozbDB2.jpg


q25o7W.jpg


OdG1Q5.jpg


VykqkV.jpg


VykqkV.jpg


532035259.gif

File-Upload.net - vuplus.zip
 

coolmeen

DREAMBOX TEKNİSYENİ
Administrator
Katılım
11 Haz 2012
Mesajlar
10,804
Tepkime puanı
645
Puanları
113
Konum
ULM Donau
Cevap: Vu+ Duo_Backup

Black Hole 2.1.4 VU+Zero

0BimM14lYd_logoblackH.jpg


Black Hole 2.1.4 VU+ Zero

What is new in Black Hole 2.1.4:

All models: Full HD Skin ready.
The 1920x1080 framebuffer support recently introduced in Vu+ drivers has made it possible to use full hd skins. But many parts of the enigma2 gui are hardcoded with fixed fonts and itemheight.
This causes fonts at 1920x1080 resolution to appear far too small. All these gui parts have been re-coded in Bh 2.1.4 to support larger fonts and itemheight in case of full hd skins (thx to Matrix10)

Solo and Duo only:
The 1920x1080 framebuffer support has required extra Ram usage. For this reason the old Solo and Duo models do not have enough free ram to run the curent images with these new features.
In Black Hole 2.1.4 we have included ram compression (zram) that increases performance by avoiding paging to disk and using a compressed block device in RAM instead, inside which the paging takes place until it is necessary to use the swap space on a hard drive or usb stick. Since using ZRAM is an alternative way to provide swapping on RAM, zram allows Linux to make more use of RAM when swapping/paging is required.

misc:
drivers: 20141126(solose, zero)
- Fix booting problem(solose)
- Support LED brightness control in idle mode(solose)
- Support LED brightness control in normal/idle(zero)
- (Brightness can be controlled in Menu -> Setup -> System -> Display Setup)
New Skin MX-Black
Meoboot update: Fixed the issue of non working usb drivers in images in multiboot.
About screen: Add drivers version, kernel version and Cpu info.
Bh Full Backup update.
OpenWebInterface update.
WirelessLanSetup: add quote to wpa_passphrase for password.
Black Hole Swap panel: Allow to create swap files upto 2 GB.
Black Hole Swap panel: Update descriptions (Thx to Ev0).
Solo2: fix ethernet problem in some Gigabit switches.
Solo/Duo: implement Zram
Librtmp update.


grTGhaqKQN_214_1.jpg


YkPJ7uMZDC_214_2.jpg


EJ9btrWOTi_214_3.jpg


s2jSrV4pbW_214_4.jpg


QiRJCLPpDN_214_5.jpg


mrPFelcpIM_214_6.jpg


8xMTayZhzA_214_7.jpg


WARNING: This Image has the latest drivers and CAN NOT be installed in multiboot. The image MUST be installed in flash.

Black Hole does not support images not installed in flash.

This latest version of the Black Hole series has been entirely rewritten and improved in the code for maximum stability and performance.

Please note that of all images Black Hole now has the best epg system:

- Integrated OpenEpg

- Rytec dedicated epg.dat

- New system epg.dat outside.

This last feature gives the possibility to various forums or communities to create their favorite EPG data files and load them into a web space.

Community members can then download it from our servers.

This feature provides other benefits such as:

Increase download speed of EPG

Download EPG from any channel

Schedule the download of EPG decoder even during standby

Users can customize the providers using Add / Remove function

Main functions of the buttons on the remote

OK button = Skin with simple information

OK button x 2 = Extra Info Skin

Blue button = Black Hole Blue Panel

Blue button and then Red button = Black Hole Epg Panel

Blue button and then Yellow button = System Monitor Panel

Blue button long press = Extensions

Yellow button = Audio menu

Green button = Black Hole Green Panel

Green button long press = Subservices

Green button and then Red button = Fast Plugin Setup

Green button x 2 = Fast Plugin

Button Red short press= access HbbTv functions

Button Red long press= Red Panel (Parallel Universes Teleportation)

Addons

Green button and then Yellow button takes you to:-

Dedicated server for BlackHole addons

Download and install additional packages from the Black Hole server

Infobar / OSD

Analog Clock Gui

Channel orbital location

Advanced Tuner Info: Sr Freq Pol Fec

Signal SNR, BER

Infobar picons

Characteristics of BlackHole Panels

Blue Panel

Extra Settings

Black Hole Speed Up

Black Hole Cron Manager (Manage schedules)

OSD Settings (OSD configuration)

Devices Manager

Usb Format Wizard

Kernel Modules Manager(Kernel module operator)

Inadyn Settings (Configure Inadyn)

Swap File Settings (Configure File Swap)

Hard Disk Settings (Configure Hard Drive)

OpenVPN Panel ( OpenVPN Panel)

Samba / CIFS Panel ( Samba Panel)

NFS Server Panel ( NFS server Panel)

Telnet Panel ( Telnet Panel)

FTP Panel ( FTP Panel)

UPnP Client Djmount

UPnP Server Mediatomb

UpnP Server Minidlna

Pcsc Panel

Tuner Server

Network Browse & Mountpoints

Info Panel

1 - Gui Setting (Gui configurations)

2 - Service Information (information system)

3 - About (info)

Memory (Memory)

Space (capacity)

CPU (processor)

Process (process)

EPG Panel

Global settings (global settings EPG)

Setting Provider (ISP settings)

Green Panel

Fast Plugin Setup (Configure quick access to your favourite plugin)

Fast Plugin (Access your favourite plugin)

Addons (added)

Addons Download Manager (Manager for package downloading)

Online Feeds Settings update

Online Black Hole image update

Manual Install BH packges (Manual installation of Black Hole packages)

Manual Install IPK packages (Manual installation of IPK packages)

Addons Uninstall Panel (Uninstalled packages)

Black Hole Statistics (See connections, top downloads and more)

Characteristics of BlackHole Panels

Red Panel

BH Parallel Universe Teleportation

BlackHole

Avalon

Chaos

Ghost

Credits

Thanks to Pedro_Newbie for Backup script

Thanks to the group of Beta Testers.

Thanks to Rytec for providing us with the server with all epg.dat files.

Thanks to MaxZ4 for Integrated EPG loader.

Thanks to Skaman for Cross EPG

Thanks to Lukkino (VDR-Italy) for the source code of OpenTV.

Thanks to Reinh@rd for the file satellites.xml.

Thanks to Littlesat and Pli Team for the original autolanguage and subtitle options code

DISCLAIMER

THE BLACK HOLE IMAGE IS BASED ON THE OFFICIAL FIRMWARE PUBLISHED BY VU+ AND IN ACCORDANCE WITH THE LAW IT CONTAINS ONLY SYSTEM ADDITIONS & GRAPHIC CHANGES.

THE BLACK HOLE IMAGE DOES NOT CONTAIN ANY EMULATOR, K E Y S, SOFTCAMS OR OTHER SYSTEM FOR VIEWING PAY - TV WITH OR WITHOUT A PAID SUBSCRIPTION.

LASTLY, THE BLACK HOLE IMAGE DOES NOT CONTAIN ANY SYSTEM TO DOWNLOAD PLUGINS OR EMULATORS FROM EXTERNAL SERVERS OR SOFTWARE THAT MAY BE USED FOR ILLEGAL PURPOSES SUCH AS CARD SHARING.

LICENSE (TERM OF USE)

THE BLACK HOLE IMAGE IS ISSUED FOR THE FREE USE FOR ALL USERS PROVIDED THAT IT WILL NOT BE CHANGED IN ANY WAY AND THAT IT WILL ONLY BE USED FOR LAWFUL PURPOSES.

ANY CHANGES OR ADDITIONS TO BLACK HOLE IMAGE THAT INVOLVE UNLAWFUL USE OF THE IMAGE SUCH AS CARD-SHARING AND EMULATORS ARE NOT ALLOWED AND CAUSE THE REVOKE OF THIS LICENSE.

This is free hobbyist software and it comes with absolutely no warranty. Use it at your own risk.


532035259.gif

Sputnik Files Upload | BlackHole-2.1.4-vuzero_usb.zip
 

nevzat4225

Aktif Üye
Katılım
6 Kas 2014
Mesajlar
6
Tepkime puanı
0
Puanları
0
Yaş
53
Konum
KONYA
Cevap: BlackHole Vu+ Duo v. 1.6.1 - Personal Backup-(ÖZEL USB BACKUP)-23.05.2011 KaYa

teşekkürler
 

coolmeen

DREAMBOX TEKNİSYENİ
Administrator
Katılım
11 Haz 2012
Mesajlar
10,804
Tepkime puanı
645
Puanları
113
Konum
ULM Donau
Cevap: Vu+ Duo_Güncel Backup

VTi "Vu+ Team Image Duo " - V 8.0.0 - 28.11.2014

547c6c8145897.jpg


From VTi Team
VTi Panel (Blue Button)

Supported languages:
English, German, Dutch, Italian, Turkish, Danish, Polish,
Russian, Ukrainian, Czech, Arabic, French, Swedish,
Portuguese (Portugal), Greek, Bulgarian, Hungarian

With modular, flexible VTi Skin: Atile HD
VTi Bootlogos and Radiomode Logo.
Short press on blue button opens VTi Panel, long press opens Pluginmenu
Support for FTDI chipset cardreader like smargo and easymouse2
Running Softcam shown in the Infobar
MovieList with extended functions
Support for full image backup and restore
Supports VTi image flash online
Restore Plugins, Bouquets, Settings, etc. during installation
Remove preinstalled packages during installation (VTi Zero)


CHANGELOG

- Treiber: 26.11.2014 (Solo SE, Zero)
- Treiber: 29.10.2014 (Duo²)
- Treiber: 21.10.2014 (Duo, Solo, Uno, Ultimo, Solo²)
- Kernel 3.13.5 (Solo², Duo², Solo SE, Zero)
- Kernel 3.9.6 (Duo, Solo, Uno, Ultimo)
- IPtables Unterstützung hinzugefügt
- Enigma2 (2014-11-21)
- AtileHD skin
- Plugin GraphMultiEPG aktualisiert und Funktionsumfang erweitert
- HbbTV aus Image entfernt (Uno, Duo)

Basiert auf Vu+ OpenEmbedded Repository 2.1
--> Änderungen von Vu+ : Vu+ Update


------------------

CHANGELOG
- driver: 26.11.2014 (Solo SE, Zero)
- driver: 29.10.2014 (Duo²)
- driver: 21.10.2014 (Duo, Solo, Uno, Ultimo, Solo²)
- kernel 3.13.5 (Solo², Duo², Solo SE, Zero)
- kernel 3.9.6 (Duo, Solo, Uno, Ultimo)
- support for IPtables readded
- Enigma2 (2014-11-21)
- update plugin graphMultiEPG (add new functions)
- remove HbbTV from image (Duo, Uno)

Based on Vu+ OpenEmbedded Repository 2.1
--> changes from Vu+ : Vu+ Update




Important Information 28.11.2014



For Vu+ Solo, Duo and Uno users:
It is not recommended to update your Vu+ STB online, due to the limited flash and RAM memory
Please download the new software and flash it.
If you decide to upgrade software online please read the following information

For all users:
When you perform an online update you will increase the image version to VTi 8.0.X. Due to the huge amount of packages, which will be updated, please note the following points:
make a backup of your software
reboot after the update
reboot process can take a few minutes
do not complain when your software is broken after update


532035259.gif

vuplus-image-bm750-20141128060902_vti_8-0-0_usb
 

coolmeen

DREAMBOX TEKNİSYENİ
Administrator
Katılım
11 Haz 2012
Mesajlar
10,804
Tepkime puanı
645
Puanları
113
Konum
ULM Donau
VuDuo.VTI.8.0.0.Backup.MatrixMod.30.11.2014.By Memorist

z2vQ19.jpg


31B23r.jpg


890mrk.jpg


XD723D.jpg


oYPnpQ.jpg


ayJP8g.jpg


E2-Setting-16 Uydu-30.KASIM.2014-KaYaCaN . Teşekkürler dostum..

AzerSpace-46E
Türksat-42E
Hellas Sat-39E
Astra-28.2E
Badr-26E
Astra-23.5E
Astra-19.2E
Eutelsat-16E
Hot Bird-13E
Eutelsat-9E
Eutelsat(DigiTürk)-7A-7B
Astra/SES-4.8E
Thor-0.8W
Amos-4W
Nilesat-7W
Hispasat-30W

Tuner A Olarak Gelişmiş,den anten kurulum ayarlarınızı yapılandırınız.

Skins Matrix Mod FurkanB dostumun emeği kullanılmıştır Kendisine çok Teşekkür ederim Matrix arayüzde yavaş açılıyor diyenler AtileHD Kullanabilir..

BootLogo ve Spinner değişti

Picon gösterimi için Usb stick ,inizi Media/usb olarak Menü+VTI >> Devicesmanagerden mount ediniz ve 100x60 picon kullanınız.

Emu Cam:Btkcam 90--CCcam 2.1.3----Oscamymod 18.55--Scam 3.59--Mgcamd 1.38. Emu Güncel.

Paylaşım satırı Cfg Etc altı CCcam.cfg dosyası oscam için /etc/tuxbox/config/oscamymod.18.55 >>oscamserver dosyanızı editleyiniz ve yeniden başlatınız.

Ağ ayarlarından

Dns1 77.88.8.8

Dns2 77.88.8.1 olarak Girilmiştir.

İmaja bu gün tarihli güncelleme yapılmıştır.

Gerekli Tüm ayarlar Yapılmıştır Caps resimlerden ön bilgi edinebilirsiniz


532035259.gif

File-Upload.net - vuplus.zip
 

coolmeen

DREAMBOX TEKNİSYENİ
Administrator
Katılım
11 Haz 2012
Mesajlar
10,804
Tepkime puanı
645
Puanları
113
Konum
ULM Donau
BLackHole-2.1.4.VuDuo.Backup.Memorist.08.12.2014

E2-Setting-16 Uydu-30.KASIM.2014- .

Tuner A Olarak Gelişmiş,den anten kurulum ayarlarınızı yapılandırınız.

Skins Original.

BlackHole BootLogo ve Spinner değişti

Picon gösterimi için Usb stick,inizi Media/usb olarak 2XMavi tuştan devicesmanagerden mount ediniz .100x60 kullanınız

Emu Cam:Mgcamd 1.3.8c-CCcam 2.2.1-Oscamymod 18.56- Emu Güncel.

Paylaşım satırı Cfg Etc altı CCcam.cfg dosyası oscam için /etc/tuxbox/config/oscamserver dosyanızı editleyiniz ve cihazı yeniden başlatıp Ccam Start yapınız

Bazen takılan aygıt,da RestartGui yapılarak boş ekran görebilirsiniz mount edebilmek için yeniden başlatmanız gerekebilir.

Hava durumu için Menü+ Weather forecast > İL kodunuzu girerek gösterebilirsiniz.

BLackhole Speed Up dan Uipositionsetup ve Wmv Wma asfmedia support aktive edilmiştir

Gerekli Tüm ayarlar Yapılmıştır Caps resimlerden ön bilgi edinebilirsiniz


İyi seyirler...[/COLOR]


g4LrEQ.jpg

5oRabA.jpg

6l6aOk.jpg

ayBnBz.jpg

XDYbJ5.jpg


532035259.gif

Dosya.tc - Ücretsiz, Hızlı ve Kolay Dosya Paylaşımı
 

coolmeen

DREAMBOX TEKNİSYENİ
Administrator
Katılım
11 Haz 2012
Mesajlar
10,804
Tepkime puanı
645
Puanları
113
Konum
ULM Donau

Bilgi / İnfo

satcafesi.net kar amacı gütmeyen bilgi & paylaşım üzerine kurulu ücretsiz bir forum sitesidir,Üyeler her türlü bilgiyi,dosya,video,resim,vs. önceden onay olmadan paylaşabilmektedir,bunedenle oluşacak herhangi bir illegal paylaşımdan satcafesi sorumluluk almamaktadır,T.CK.na aykırı paylaşım görüldüğünde iletişim kısmından bizlere bildirmenizi rica ederiz.

Yasal Haklar

Foruma gönderilen mesajlardan öncelikle mesaj sahipleri sorumludurlar. Forum yöneticileri başkalarının mesaj veya konularından sorumlu tutulamazlar. Ancak yasal nedenlere bağlı herhangi bir şikayet durumunda, yetkililer bilgilendirildiği takdirde ilgili düzenleme yapılacaktır.
Üst