Çok eski bir web tarayıcısı kullanıyorsunuz. Bu veya diğer siteleri görüntülemekte sorunlar yaşayabilirsiniz.. Tarayıcınızı güncellemeli veya alternatif bir tarayıcı kullanmalısınız.
[ROM] [4.4.x] Galaxy S2 için Android 6.0 ROM'u Çıktı!
Android cephesinde en çok tercih edilen Custom ROM unvanını elinde bulunduran Cyanogenmod, Galaxy S2 için Android 6.0 Marshmallow tabanlı ROM'unu yayınladı.
Samsung’un 5 yıl önceki amiral gemi modeli Galaxy S2, henüz Galaxy S6 ve Galaxy Note 5 gibi üst seviye modellerin bile almadığı Android 6.0 Marshmallow güncellemesiyle gündemde. Samsung’un bir döneme damgasını vuran telefonu Galaxy S2, Android 6.0 Marshmallow sürümüne kavuştu. Android 6.0 Marshmallow, Cyanogenmod ile Galaxy S2 modelinde!
5 yaşındaki efsane telefonu için desteğini yıllar önce desteğini kesenSamsung, Galaxy S2 için en son Android 4.1 Jelly Bean güncellemesini sunmuştu.
Ancak popüler Custom ROM geliştirici ekibi Cyanogenmod, geçtiğimiz günlerde Galaxy S3 içinde yayınladığı Android 6.0 Marshmallow sürümünü şimdi ise Galaxy S2 modeli içinde yayınladı.
Henüz Nightly aşamasında olan Cyanogenmod 13 Nightly ROM, eksiklerine rağmen başarılı bir şekilde çalışıyor. Eğer sizde eksikliklere ve hatalara rağmen Android 6.0 Marshmallow tabanlı Cyanogenmod 13 Nightly ROM’uGalaxy S2 telefonunuza yüklemek istiyorsanız burayatıklayabilirsiniz Elbette bu işlemi yapabilmek için telefonununuz ROOT’lu olması gerektiğini de son olarak söyleyelim.
Those are the two most important set of files that you need right now and I assume that you've already installed a custom recovery... you wouldn't be reading this if you don't know how to do that, would you? But if you don't have em already, here are the instructions for installing theTWRP recovery on the SAMSUNG GALAXY S2.
[h=2]TWRP recovery[/h]
Download and transfer the Samsung Galaxy S2 ROM and Marshmallow Gapps file to your device’s internal storage.
Boot your device into TWRP recovery.
Select “Wipe” from TWRP main menu and do a “Swipe to Factory Reset” on the bottom of the screen.
Go back to TWRP main menu, tap on “Install” and select the CM13 .zip file that you transferred to your device in Step 1.
After selecting the .zip file, do “Swipe to Confirm Flash” on the bottom of the screen to begin the custom ROM installation process. This may take some time.
Once your ROM is successfully flashed, you’ll see “Wipe cache/Dalvik” option, select it and then do “Swipe to wipe” on the bottom of the screen.
Now flash the Marshmallow Gapps file similarly like you flashed the ROM file.
After flashing both Samsung Galaxy S2 CM13 and Gapps, Reboot your device.
OR
[h=2]Cyanogen recovery[/h]
Download and transfer the Samsung Galaxy S2 ROM and Marshmallow Gapps file to your device’s internal storage.
Boot your device into Cyanogen recovery.
Select “Wipe data/ factory reset”, then select “Yes” to confirm.
Now select “Apply update” from the main menu and select “Choose from internal storage”.
Select the Samsung Galaxy S2 CM13 ROM file that you transferred to your device in Step 1 above.
└ It may begin to install without confirmation.
Once the Samsung Galaxy S2 CM13 ROM is installed, flash the Marshmallow Gapps file like you flashed the Samsung Galaxy S2 CM13 ROM.
After flashing both Samsung Galaxy S2 CM13 and Gapps, Reboot your device.
[h=2]Other CM13 Releases[/h]You might want to check out the guides for the other CM13 Marshmallow releases:
That's all there is to it. If everything went well, your device will now boot and you will be welcomed by the Android 6.0 Marshmallow setup page. Thanks for reading how to install Android 6.0 Marshmallow CyanogenMod 13 on SAMSUNG GALAXY S2 and I hope that this tutorial has helped you.