Power of Dreams Image for DM 800
- Konbuyu başlatan polta
- Başlangıç tarihi
25/08/2011
DOWNLOAD
Kod:
Mise à jour du 25/08
dreambox-dvb-modules: update dm800, dm8000, dm800se, dm500hd hardware drivers :
- added 3D framebuffer support (for side by side and top and bottom 3D services)
(no auto detection yet)
- fixed audio sync problems on playback to live transition
- bcm4505/06
* experimentally added blindscan support (needs e2 changes)
* experimentally added "Turbo FEC" support (needs e2 changes)
* added constellation buffer read support
* fixed problems when more than one 4505/4506 tuner is used in the same box
* fixed standby problems
* added possibility to use SCPC optimized search ranges
- alps-bsbe1-c01a
* experimentally added blindscan support (needs e2 changes)
* added constellation buffer read support
* fixed locking problems (better performance)
- bcm4501:
* added possibility to use SCPC optimized search ranges
- cxd1981: fixed tuner problems after bootup from deepstandby in DVB-C mode
- added Nagra rev. 1.1 CI support to dm8000
- small alsa signed / unsigned fix
Diffstat (more/less context) (ignore whitespace changes)
linux-opendreambox-2.6.18: update linux kernel for dm800/dm8000/dm800se/dm500hd/dm7020hdDOWNLOAD
Power of Dream HD OE 1.6 CrossEPG Edition for DM800
27-08-2011
ATTENTION : modification de la gestion des images complètes
Avant : l'image POD complète ne changait pas lors des mises à jours, et pour installer un démo avec une POD à jour, il falait charger une image un peu ancienne et faire la mise à jour
Désormais : l'image complète POD est mise à jour elle aussi :
- pour installer une POD complète : prendre l'image en début de thread, vous êtes a jours
- si vous avec déjà une POD de la bonne génération installée, ca ne change pas, il suffit de mettre à jour (Menu - Paramétrer - Gestionnaire logiciel - Mise à jour logiciel)
http://hotfile.com/dl/128158997/a34c993/POD-HD-OE16c-dm800.nfi.html
27-08-2011
ATTENTION : modification de la gestion des images complètes
Avant : l'image POD complète ne changait pas lors des mises à jours, et pour installer un démo avec une POD à jour, il falait charger une image un peu ancienne et faire la mise à jour
Désormais : l'image complète POD est mise à jour elle aussi :
- pour installer une POD complète : prendre l'image en début de thread, vous êtes a jours
- si vous avec déjà une POD de la bonne génération installée, ca ne change pas, il suffit de mettre à jour (Menu - Paramétrer - Gestionnaire logiciel - Mise à jour logiciel)
http://hotfile.com/dl/128158997/a34c993/POD-HD-OE16c-dm800.nfi.html
Power of Dream HD OE 1.6 CrossEPG Edition for DM800
27-08-2011
ATTENTION : modification de la gestion des images complètes
Avant : l'image POD complète ne changait pas lors des mises à jours, et pour installer un démo avec une POD à jour, il falait charger une image un peu ancienne et faire la mise à jour
Désormais : l'image complète POD est mise à jour elle aussi :
- pour installer une POD complète : prendre l'image en début de thread, vous êtes a jours
- si vous avec déjà une POD de la bonne génération installée, ca ne change pas, il suffit de mettre à jour (Menu - Paramétrer - Gestionnaire logiciel - Mise à jour logiciel)
http://hotfile.com/dl/128158997/a34c...dm800.nfi.html
27-08-2011
ATTENTION : modification de la gestion des images complètes
Avant : l'image POD complète ne changait pas lors des mises à jours, et pour installer un démo avec une POD à jour, il falait charger une image un peu ancienne et faire la mise à jour
Désormais : l'image complète POD est mise à jour elle aussi :
- pour installer une POD complète : prendre l'image en début de thread, vous êtes a jours
- si vous avec déjà une POD de la bonne génération installée, ca ne change pas, il suffit de mettre à jour (Menu - Paramétrer - Gestionnaire logiciel - Mise à jour logiciel)
http://hotfile.com/dl/128158997/a34c...dm800.nfi.html
MARMARİS Lİ
Aktif Üye
Power of Dream HD OE 1.6 02.06.2010
Update the plugin Fancontrol2 :
- WebIF Enlargement - Logging
- WebIF Multi-language support
- Monitor in Extension-menu (Blue-Button)
- Monitor supplemented with speed
- Info button on the monitor enforces a single reading of HDD temperature
- setting: HDD-temperature reading in sleep mode (in Idle mode the temperature always read)
Auto: At the start of FC2 will be tested once, if the HDD has started, if so, is the reading in sleep mode disabled
- Box shutdown on reaching the set temperature or fan failure
Release r1: adjustable monitor in the extension menu ; is Fan in Standby off, it runs in the first 5min with min Speed
Power of Dream HD OE 1.6
Update the plugin Fancontrol2 :
- WebIF Enlargement - Logging
- WebIF Multi-language support
- Monitor in Extension-menu (Blue-Button)
- Monitor supplemented with speed
- Info button on the monitor enforces a single reading of HDD temperature
- setting: HDD-temperature reading in sleep mode (in Idle mode the temperature always read)
Auto: At the start of FC2 will be tested once, if the HDD has started, if so, is the reading in sleep mode disabled
- Box shutdown on reaching the set temperature or fan failure
Release r1: adjustable monitor in the extension menu ; is Fan in Standby off, it runs in the first 5min with min Speed
Power of Dream HD OE 1.6
MARMARİS Lİ
Aktif Üye
Power of Dream HD OE 1.6 for DM800
Date: 28-09-2010
Changes:
- Samba: Add version 3.0.37 for opendreambox
- Update SmartPicons to version 1.3
Power of Dream HD OE 1.6 for DM800
Date: 28-09-2010
Changes:
- Samba: Add version 3.0.37 for opendreambox
- Update SmartPicons to version 1.3
Power of Dream HD OE 1.6 for DM800
MARMARİS Lİ
Aktif Üye
lastest changes 02.11.2010:
Passage of Sandbox Smartpicons 1.43: addition of chaines 'Africa '
http://www.fileserve.com/file/N3Sx5gN
Passage of Sandbox Smartpicons 1.43: addition of chaines 'Africa '
http://www.fileserve.com/file/N3Sx5gN
MARMARİS Lİ
Aktif Üye
Power of Dream HD OE 1.6 for DM800
09/11/2011
Update card manager:
- Fixed French CSAT HD on VIA cards
- Fixed French TNTSAT SD
- Fixed French TNTSAT HD
POD-HD-OE16-dm800-09.11.2010.nfi
09/11/2011
Update card manager:
- Fixed French CSAT HD on VIA cards
- Fixed French TNTSAT SD
- Fixed French TNTSAT HD
POD-HD-OE16-dm800-09.11.2010.nfi
MARMARİS Lİ
Aktif Üye
Update of 10/11/2010
Updating of the administrator of card in 2.09
--------------
ADD Hypercam 2.08
--------------
=> Fixed ***
--------------
add Hypercam 2.09
--------------
=> Fixed some compatibility bugs for PPC platforms and *** support
=> Changed VIA EMM operations. Hope this will help for some people experiencing trouble with updates
Power of Dream HD OE 1.6 for DM800
Updating of the administrator of card in 2.09
--------------
ADD Hypercam 2.08
--------------
=> Fixed ***
--------------
add Hypercam 2.09
--------------
=> Fixed some compatibility bugs for PPC platforms and *** support
=> Changed VIA EMM operations. Hope this will help for some people experiencing trouble with updates
MARMARİS Lİ
Aktif Üye
Power of Dream HD OE 1.6 for DM800
26-11-2011
Changes:
Updated enigma, plugins and skins to 24/11
http://hotfile.com/dl/85112358/57163...dm800.nfi.html
26-11-2011
Changes:
Updated enigma, plugins and skins to 24/11
http://hotfile.com/dl/85112358/57163...dm800.nfi.html
MARMARİS Lİ
Aktif Üye
Power of Dream HD OE 1.6 for DM800
30-11-2011
Changes:
- Update of enigma2 version of 30/11
- Fixed the rule notament worries 'SID not found' in the records.
http://hotfile.com/dl/85968180/449fc...dm800.nfi.html
30-11-2011
Changes:
- Update of enigma2 version of 30/11
- Fixed the rule notament worries 'SID not found' in the records.
http://hotfile.com/dl/85968180/449fc...dm800.nfi.html
MARMARİS Lİ
Aktif Üye
Update 04.11.2010
- New Astra 19 smartpicons based peakons of mimi74 (a big thank you to him)
- New version of gstreamer (core + base 0.10.31, 0.10.26 good)
- Enigma2 Day (changelog: http://git.opendreambox.org/?p=enigma2.git, a = log h = refs / heads / experimental)
Attention new drivers for dm800se
http://hotfile.com/dl/87006317/1aa4b...dm800.nfi.html
- New Astra 19 smartpicons based peakons of mimi74 (a big thank you to him)
- New version of gstreamer (core + base 0.10.31, 0.10.26 good)
- Enigma2 Day (changelog: http://git.opendreambox.org/?p=enigma2.git, a = log h = refs / heads / experimental)
Attention new drivers for dm800se
http://hotfile.com/dl/87006317/1aa4b...dm800.nfi.html
MARMARİS Lİ
Aktif Üye
Updated of 19 / 12 / 2010
Added hypercam 2.11 for the support TNTSAT
http://hotfile.com/dl/90597472/629d6...dm800.nfi.html
Added hypercam 2.11 for the support TNTSAT
http://hotfile.com/dl/90597472/629d6...dm800.nfi.html
MARMARİS Lİ
Aktif Üye
Power of Dream HD OE 1.6 for DM800
26-01-2011
Changes:
- Complete all the images have been updated to version of the day
Changelog OE: Here
Changelog Enigma2 : Here
POD-HD-OE16-dm800-26.01.2010.nfi
26-01-2011
Changes:
- Complete all the images have been updated to version of the day
Changelog OE: Here
Changelog Enigma2 : Here
POD-HD-OE16-dm800-26.01.2010.nfi
MARMARİS Lİ
Aktif Üye
Power of Dream HD OE 1.6 for DM800
16-02-2011
Changes:
- Major update of the image: kernel, drivers, enigma2, media player,.....
Changelog OE: Here
Changelog Enigma2 : Here
A noter que cette image ne contient pas les drivers d'aujourdh'ui 16/02 que demanderons une mise à jour du bootloader.
POD-HD-OE16-dm800-16.02.2011.nfi
16-02-2011
Changes:
- Major update of the image: kernel, drivers, enigma2, media player,.....
Changelog OE: Here
Changelog Enigma2 : Here
A noter que cette image ne contient pas les drivers d'aujourdh'ui 16/02 que demanderons une mise à jour du bootloader.
POD-HD-OE16-dm800-16.02.2011.nfi
MARMARİS Lİ
Aktif Üye
update From 22/02/2011
What is new:
ADDED HYPERCAM
=> Fixed French CSAT package operation
=> Fixed French TNTSAT package operation
=> Fixed French ORANGE package operation
Download:
http://hotfile.com/dl/106817378/9bcf...dm800.nfi.html
What is new:
ADDED HYPERCAM
=> Fixed French CSAT package operation
=> Fixed French TNTSAT package operation
=> Fixed French ORANGE package operation
Download:
http://hotfile.com/dl/106817378/9bcf...dm800.nfi.html
MARMARİS Lİ
Aktif Üye
POD HD OE 1.6 DM 800hd CrossEPG Edition
As you know, we attach great importance to the provision of an image incorporating a reliable EPG, to make the best use of plugins like autotimer TimerOptimizer Sandbox and integrated into the POD. For technical reasons, we chose not to use the plugin Rytec but CrossEPG, which seems to offer better benefits, and we permetre, if we wish one day to provide our own source xmltv. Note that CrossEPG allows you to use the EPG data Rytec, and that its use would REQUIRE more rebooting Enigma.
Once the image is installed, you will find the settings menu CrossEPG parramètres.
If you already use a POD HD, you can update it, then uninstall and install RytecEPG CrossEPG menu management extensions.
http://hotfile.com/dl/113415079/24e5...dm800.nfi.html
As you know, we attach great importance to the provision of an image incorporating a reliable EPG, to make the best use of plugins like autotimer TimerOptimizer Sandbox and integrated into the POD. For technical reasons, we chose not to use the plugin Rytec but CrossEPG, which seems to offer better benefits, and we permetre, if we wish one day to provide our own source xmltv. Note that CrossEPG allows you to use the EPG data Rytec, and that its use would REQUIRE more rebooting Enigma.
Once the image is installed, you will find the settings menu CrossEPG parramètres.
If you already use a POD HD, you can update it, then uninstall and install RytecEPG CrossEPG menu management extensions.
http://hotfile.com/dl/113415079/24e5...dm800.nfi.html
MARMARİS Lİ
Aktif Üye
Update 07/04:
Added plugin CoolTV Guide Coolman in the DLC
http://hotfile.com/dl/113666074/d972...dm800.nfi.html
Added plugin CoolTV Guide Coolman in the DLC
http://hotfile.com/dl/113666074/d972...dm800.nfi.html
MARMARİS Lİ
Aktif Üye
Power of the dreams update to 01.05.2011
So it looks like I Dream severely screwed up, probably at a drivers license since ceased to operate a specific date, it is suspicious. Finally whatever reason, we m'aimons not leave users stranded POD-HD.
- v4l-dvb-modules_hg.bb: fixed get_property implementation
- update dm800 dm800se dm500hd dm8000 hardware drivers
-> hotfix freeze after some channel changes
-> throttled mpeg decoder debug output a bit
-> fixed bcm4506 tuner crash (no hab ack messages in kernel debug)
-> fixed bcm4506 manual LDPC FEC modes
-> fixed readback of current pilot state for dvb-s2 frontends (needs a linuxtv api fix)
-> readback corrected symbolrate and frequency for bcm4501 and bcm4506 - cxd1981 DVB-C optimizations
Enigma2 et plugins en date du 15 avril.
http://hotfile.com/dl/116442205/99a6...dm800.nfi.html
So it looks like I Dream severely screwed up, probably at a drivers license since ceased to operate a specific date, it is suspicious. Finally whatever reason, we m'aimons not leave users stranded POD-HD.
- v4l-dvb-modules_hg.bb: fixed get_property implementation
- update dm800 dm800se dm500hd dm8000 hardware drivers
-> hotfix freeze after some channel changes
-> throttled mpeg decoder debug output a bit
-> fixed bcm4506 tuner crash (no hab ack messages in kernel debug)
-> fixed bcm4506 manual LDPC FEC modes
-> fixed readback of current pilot state for dvb-s2 frontends (needs a linuxtv api fix)
-> readback corrected symbolrate and frequency for bcm4501 and bcm4506 - cxd1981 DVB-C optimizations
Enigma2 et plugins en date du 15 avril.
http://hotfile.com/dl/116442205/99a6...dm800.nfi.html
MARMARİS Lİ
Aktif Üye
Power of Dream HD OE 1.6 CrossEPG Edition for DM800
06-05-2011
Changes:
- Implementation of the EPG source CSAT France Sandbox. After updating your dreambox, go to the configuration to activate the source CrossEPG Sandbox.
-> Do not enable multiple sources for the same provider
-> the source has given seven days to Dream program. A source 14 days will be available for future HD ET9000 POD, but the memory of Dreams does not use it.
- update dm500hd, dm800se, DM8000, DM7025, DM800 hardware drivers - bcm4506: reintroduce minimum timeout of 1.5 sek tune to tune fix Problems Caused by Slow failed switches SEC
- finally fixed freeze hotfix 20110501
http://hotfile.com/dl/116974895/c400...dm800.nfi.html
06-05-2011
Changes:
- Implementation of the EPG source CSAT France Sandbox. After updating your dreambox, go to the configuration to activate the source CrossEPG Sandbox.
-> Do not enable multiple sources for the same provider
-> the source has given seven days to Dream program. A source 14 days will be available for future HD ET9000 POD, but the memory of Dreams does not use it.
- update dm500hd, dm800se, DM8000, DM7025, DM800 hardware drivers - bcm4506: reintroduce minimum timeout of 1.5 sek tune to tune fix Problems Caused by Slow failed switches SEC
- finally fixed freeze hotfix 20110501
http://hotfile.com/dl/116974895/c400...dm800.nfi.html